Rebound adjustment independent from compression
Fully useable adjustment range
Fine yet noticeable change per click
10 clicks low speed compression
19 clicks high speed compression
24 clicks rebound
High volume canister
Adjustable gas pressure
22 mm shaft
Highest flow rate to piston
Ideal for lighter applications and aluminium body dampers
The classic JRZ design
Sprung mass is controlled with rebound damping, delivered smoothly by the 8060 motorsport piston. The 12 series rebound system and 8060 piston provides a linear damping characteristic with smooth pressure development independent of compression forces. This allows the damper to transition between rebound and compression efficiently, maximizing grip and reducing tire wear.
CONTROL OF UNSPRUNG MASS
Control is achieved by using compression damping controlling the movement of the unsprung mass. By doing this the car will take kerb stones or road bumps extremely well and the car will not be unsettled with great control for the driver.
MINIMIZED TYRE WEAR
Using compression damping to control the unsprung mass will result in less tyre wear and better tyre temps. The unsprung mass will move according the tyre’s natural frequency. Using the compression damping the contact patch of the tyre to the road will be maximized.
LARGE ADJUSTABLE RANGE
Damping is available over a large adjustment range with fine tuning increments. Set up is easy to find and spring rates can be changed without having to revalve the damper.
ADJUSTABLE GAS PRESSURE
The combination of the 22 mm shaft and the use of nitrogen pressure results in a lifting force created by the damper. This lifting force is available through the whole stroke of the damper and works together with the spring, The lifting force is not a spring rate, but gives the car platform.