Dyno-Proven Gains up to +18 HP & +22 Lbs. x Ft. TQ
Outflows Factory Intake by 28%
One-Piece XLPE Housing Seals to Fender
Clear Sight Window for Convenient Filter Inspection Without Disassembly
Washable and Reusable Pro 5R Air Filter for Maximum Performance
Premium T-Bolt Clamps and a Reinforced Coupler Provide a Secure Seal
proud to introduce the all new Momentum sealed intake system for the 2014
Chevrolet Corvette (C7) with the V8-6.2L engine. This all new Momentum intake
system resulted in 18 horsepower and 22 lbs. ft. torque and outflows the
factory intake by 42%. This system is
superior in every way, from the one-piece sealed housing, to the massive air
filter, roto-molded tube w/ built-in resonance chamber and premium hardware.
This system uses a CAD designed, dyno-tuned, roto-molded intake tube &
housing to achieve maximum power gains while maintaining a perfect fit. This
is a direct bolt-on kit and requires no cutting or drilling on OEM
Unique One-piece Housing w/ Sight Window:
The one-piece sealed housing is used to eliminate the use of multiple
components and ensure the coolest air intake charge available. A large clear
sight window allows for filter inspection without removal of the air box. The
roto-molded housing is made out of black cross-linked polyethylene and mounts
directly into the factory location on the fender well to capture the coolest
air available from the factory intake tract.
This system uses a CAD designed, dyno-tuned, roto-molded intake tube to
achieve maximum power gains while maintaining a perfect fit. This tube has a
built-in resonance chamber to catch un-wanted air intake noises. Two billet
aluminum fittings are mounted on the tube to provide a perfect connection
with the factory vacuum lines.
Massive Cone Air Filter:
This Momentum intake system was designed around the largest filter possible
to allow maximum performance and filtration. This cone filter has a massive
7" oval flange and is 9-1/2" tall Pro DRY S filter media. The Pro
DRY S performance air filter features 3-layers of progressively finer mesh
synthetic "oil-free" media and is constructed with 100%
polyurethane frame for long life and multiple cleaning cycles.
Premium stainless steel T-bolt clamps and a
reinforced silicone hump coupler are used for strength and durability
while also providing the most secure installation available. Momentum intakes
are designed with fewer parts for a quick and simple installation.
Power, Protection and Simplicity.
*Note: This intake
system is not CARB exempt at this time and is not legal for sale in
California or use on vehicles registered with the California Department of
aFe Intake System - Stage 2 Si: If you want to maintain a factory appearance the aFe Stage 2 Si Sealed Air Box provides quiet performance and industry-leading power gains.
* *Ram Air Scoop* - Built-in ram scoop forces cold air to filter for greater efficiency and performance gains.
* *Clamp Stops* - Raised stops on aFe tubes provide a more secure seal and eliminate slippage versus flat, straight tubes.
* *3-Angle Adapter* - Specially developed velocity stack with 3 different angles dramatically increase airflow from the filter to the intake tube.
* *Quality Hardware* - aFe uses only top-quality hardware like stainless steel button head bolts and brass inserts.
* *MAF Sensor Pad* - Precision tuned MAF Sensor Pad will not affect vehicle performance or produce check engine light warnings.