| THE MOST COMPLETE FUEL INJECTION SYSTEM AVAILABLE
Edelbrock is known for complete performance packages that offer bolt-on performance ready to run right "out-of-the-box". Pro-Flo XT is no exception. Each package includes a complete intake manifold assembled with fuel injectors, fuel rails and throttle body, electronic engine control unit (ECU), handheld calibration module, Mallory® distributor, complete pre-terminated two-piece efi harness, fuel pump, fuel filter, fuel hose, attaching hardware and software. The unique two-piece harness offers quick connection of the engine and chassis harness at the bulkhead on the firewall for easy connection and quick removal if needed.
CHEVROLET 262-400 V8 DESIGNED SPECIFICALLY FOR S/B CHEVY'S
These Pro-Flo XT EFI systems are ideal for converting carbureted engines to EFI. They offer more efficiency and driveability in Performer-level engines. This system is ideal for small-block Chevys in any type of vehicle from a 4x4 to a street rod or muscle car. Modern electronics complement the new Edelbrock Pro-Flo XT EFI manifold designed specifically for this EFI system. Kits #3528/#35283 are designed for 1986 and earlier small-block Chevy engines with Vortec-style heads like the Edelbrock E-Tec aluminum heads and offer even greater performance potential. For non-emission engines.
| Brand |
|
Edelbrock |
| Manufacturer's Part Number |
|
35273 |
| Part Type |
|
Fuel Injection Systems |
| Product Line |
|
Edelbrock Pro-Flo XT EFI Systems |
| Xplosive Performance Part Number |
|
EDL-35273 |
|
|
|
|
|
|
| EGR |
|
No |
| Injection Style |
|
Multi-port |
| Metering Style |
|
Speed density (Map-N) and speed throttle (Alpha-N) |
| Intake Manifold Included |
|
Yes |
| Intake Section Included |
|
Complete |
| Intake Material |
|
Aluminum |
| Intake Finish |
|
Black |
| Engine Block Style |
|
Stock/OEM standard deck |
| Fuel Rails Included |
|
Yes |
| Throttle Body Included |
|
Yes |
| Venturi Quantity |
|
1 |
| Venturi Diameter (mm) |
|
90.00mm |
| Throttle Body Material |
|
Cast aluminum |
| Throttle Body Finish |
|
Natural |
| Injectors Included |
|
Yes |
| Calibration Module Included |
|
Yes |
| ECM Included |
|
Yes |
| Wiring Harness Included |
|
Yes |
| Oxygen Sensor Included |
|
Yes |
| Fuel Pump Included |
|
Yes |
| Fuel Pressure Regulator Included |
|
Yes |
| Distributor Included |
|
Yes |
| MAP Sensor Included |
|
Yes |
| IAT Sensor Included |
|
Yes |
| TPS Sensor Included |
|
Yes |
| IAC Motor Included |
|
Yes |
| Quantity |
|
Sold as a kit. |
| |
With a ready-to-run base calibration and the exclusive XT Calibration Module, the Edelbrock Pro-Flo XT EFI systems deliver proven performance and maximum tunability right out of the box. They come complete with everything required to install them on a small block Chevy with conventional or Vortec-style cylinder heads. The electronic control unit (ECU) is the heart of the Edelbrock Pro-Flo XT EFI systems. Its advanced features include fully sequential injection, downloadable calibrations for different engine parameters, and a host of options to customize the systems exactly to your specifications. These systems also support laptop tuning and closed-loop fuel targets with a narrowband sensor (included) or an optional wideband controller. Modern electronics complement the new Edelbrock Pro-Flo XT EFI intake manifold design. The eight equal-length runners and large plenum make this intake ideal for maximum power and drivability in the 1,500 to 6,500 rpm range. The Edelbrock Pro-Flo XT EFI systems come complete with an Edelbrock Pro-Flo XT EFI manifold, an Edelbrock 90mm throttle body, extruded aluminum fuel rails, and Pico fuel injectors that are assembled at the factory. They also include a programmable ECU, wiring harness, and exclusive calibration module. Available in a natural or brilliant black powdercoated finish, the Edelbrock Pro-Flo XT EFI systems bring a user-friendly design with high-tech components for the ideal high performance street vehicles. |
