The CryO² is a revolutionary new, award wining product designed to reduce the temperature of the air/fuel intake charge thus creating power. Through the science of aerodynamics and cryogenics, Design Engineering has developed a system to harness the cryogenic properties of liquid Co² to lower the air/fuel intake charge by up to 60%. The system is modular and can be easily expanded. The CryO² system provides two methods of cooling the air charge and one method of cooling the fuel charge, all utilizing the same burst of liquid Co². Co² is readily available at any welding supply shop or where paintball guns are charged. Welcome to the future of power.
The foundation to every CryO² System. Must have this kit to utilize CryO² components. The kit includes a 10 pound Co² tank, cryogenic solenoid valve, all necessary fittings, 14 ft. stainless steel hose, full wide open switch, arming switch, and wiring kit. Only one kit is needed to operate all the CryO² components.
The CryO² Intercooler Sprayer mounts directly to the front of the intercooler or aftercooler and vents the liquid Co² directly onto the cooling fins, thus enhancing the performance of the intercooler by more than 50%. This component must always be the last in the CryO² system as it vents the liquid Co² charge. The CryO² Intercooler Sprayer mounts directly to the front of the intercooler or aftercooler and vents the liquid Co² directly onto the cooling fins, thus enhancing the performance of the intercooler by more than 50%. This component must always be the last in the CryO² system as it vents the liquid Co² charge
The dramatic purge effect that people have come to love is now availiable at a fraction of the cost of other systems on the market. They can be used as a vent to a CryO2 system or as a stand alone show system. Must be used with a CryO2 Tank and Install kit (#080100 or #080102 or #080108 ). The purges come in single or dual vents and the supply line can be split multiple times for multiple bursts around the car. You can also use the purge system seperate from the CryO2 performane system buy utilizing the purge kits that includes a solenoid vave and extension hose. This set-up will seperate the performance from the show purge. CryO2 Purge Systems Get the Nitrous look without the Nitrous cost. The CryO2 purge system purges CO2 at a fraction of the cost.
* 10 lb. CO2 tank
* Cryogenic solenoid valve
* All necessary fittings
* 14 ft. stainless steel feed line
* Full wide-open and arming switches
* Momentary push button
* Electrical and hardware pack
* 16 in. x 5 in. front-mount intercooler sprayer
* Stainless steel zip ties for securing the sprayer