QA1 Corvette Double Adjustable Shocks

Stock Mount Shock Absorbers for your 1963 - Present Corvette

QA1 offers aluminum double adjustable shocks for your 1963 to present Corvette. Double adjustable valving allows for independent control of compression and rebound for precise control of the vehicle's suspension. With its smooth look, high performance handling and unbeatable price, you can't go wrong with a QA1 Corvette double adjustable shock.

• Aluminum
• Non-Coil-Over and Coil-Over
• Made in the U.S.A.
• Easy, Bolt-In Installation
• 100% Dyno Tested and Serialized.

Notes: Some front applications may require the lower a-arm to be dropped for installation. Body diameter may be too large to allow mounting from the bottom. Some control arm's shock openings may need to be enlarged to accept a QA1 shock.

Stud mounts are measured to the shoulder of the stud. Add 13/16" for installed compressed length per stud mount. Loops and t-bars are measured to the center of the loop. Lengths may vary slightly.

Due to deviations from the factory ride heights, it may be necessary to check the actual ride height of your particular applications. See our Tech section for information on measuring proper ride height.