Chevrolet Corvette APR Performance GTC500 C6 Bodies Spec Rear Wing/ C6, C6 Z06, Grand Sport, ZR1.

0 Review(s) Write a Review
Your Price: $1,830.00
Part Number: 2974
Availability:

Choose Options and Quantity

*

Send to:

*We'll ask for shipping info at checkout
Mounting bases sit at edges of trunk lid. SCCA Classes Approved: STO, T1, GT2/ST, GT1
Warning
User assumes full responsibility for ensuring proper installation as intended. Professional installation by well-qualified personnel is highly recommended. The vehicle applications shown above are intended to work as a complete system when installed onto original vehicle body parts (i.e. trunk lids, hatches, etc.). To insure proper function and reliability, APR advises against modification or substitution of any component of the intended installation. Any modification or substitution of the airfoil, side plates, pedestals, mounting bases, mounting brackets, or hardware included with the wing kit may create unsafe operating conditions and ultimately cause this system to fail. Substitution of original vehicle manufacturer parts needed for the intended installation (i.e. rear trunk lid or rear hatch) with non-original parts may also create unsafe operating conditions and ultimately cause this system to fail.

The World's Widest Aftermarket Adjustable GT Wing
Spanning 70 inches, the GTC-500 Carbon Fiber Adjustable Wing is the largest wing available in APR's catalog. With its optimized 3D airfoil shape, the GTC-500 is perfect for high speed touring applications and supplies an ample amount of downforce without causing excess drag.

All GTC Series wings feature an aerodynamic 3D designed airfoil shape to obtain the optimal balance of downforce. This design allows for a reduction in drag, yet maintains an ideal level of downforce. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design. Each GTC Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) or fiber reinforced polymer (FRP) composite materials. CFRP models contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. FRP models contain woven pre-pregnated glass fiber sheets for high strength at reasonable weight. All CFRP and FRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum molds.

Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

Center section to outer section angle difference: 10 degrees

Gurney Flaps
Gurney flaps are now available for all of APR's GTC-series (200/300/500) wings. These are super lightweight, made with carbon fiber using the pre-pregnated carbon process, and conform perfectly to the contours of the GTC-series 3D airfoils. They are easily attached using the included double-sided tape.

The Gurney flap (a.k.a. wickerbill) is an aerodynamic device that was originally pioneered and developed in the 1970s by a racing driver named Dan Gurney. Unbeknownst to his competition, this device was used to increase downforce while minimizing increase in drag. He found that not only did this device increase the lift/drag (L/D) ratios, it also increased the stalling angles (so he could operate the airfoils at greater pitch angles). It took a few years for everyone else to catch on to its purpose, and now, the Gurney flap (or similar device) can be seen in race cars and even airplanes all over the world.

 
A
B
C
D
E
F
G
GTC-500 Universal
70"
#
13.5"
47"
7.25"
12"
5"
Acura NSX 1990-2005
70"
#
10.5"
OEM
13.0"
12"
5"
Chevrolet Corvette C6 2005-Up
70"
#
10.5"
56"
9.0"
12"
5"
Dodge Viper Convertible 2003-Up
70"
#
10.5"
26.5"
9.0"
12"
5"
Dodge Viper Coupe 2006-Up
70"
#
10.5"
30.5"
9.0"
12"
5"
Ford Mustang S197 2005-Up
70"
#
10.5"
49"
9.0"
12"
5"
Mazda RX-7 1993-1997
70"
#
13.5"
47"
7.25"
12"
5"
Mitsubishi Evolution 8 / 9 2003-2007
70"
#
13.5"
OEM
9.0"
12"
5"
Nissan GTR R35 2009-Up
70"
#
10.5"
42"
9.0"
12"
5"
Subaru Impreza WRX/STI 2002-2007
70"
#
13.5"
48"
7.25"
12"
5"
Toyota Supra 1994-1997
70"
#
15"
OEM
**
12"
5"
Special Notes:
#Variable cord length (12.75" Inner/9" Outer). **Fiberglass Mounting Base Included.

 

Mounting bases sit at edges of trunk lid. SCCA STO Class Approved.

Reward Points

27 points will be rewarded to you when you buy this item.

Recently Viewed Items

TOP